Setra-system SRCM Manuel d'utilisateur télécharger pdf (Page 31)

USB Port

Updating Firmware

Note: Before updating rmware, perform USB Conguration Cloning. Refer

to USB Conguration Cloning on previous page.

The USB port can be used for upgrading the SRCM rmware in the eld.

To upgrade the rmware you must rst download the rmware for the lat-

est versions of the hex le for the host controller, the USB hex le and the

BACnet hex le, these are EMS1009.hex, usb.hex and BACnet.hex. Place the

new les on the thumb drive. Plug in the USB adapter cable, shown on previ-

ous page, and the ash drive.

The SRCM will automatically detect the USB drive bring up a window.

1. Press the Change button.

2. Scroll to the Upgrade Host Firmware screen shown here.

3. After the host rmware has been updated, change to the Upgrade

Communication Firmware screen and press START.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 42 43

Pas de commentaire

Setra-system SRCM Manuel d'utilisateur Page 31