Setra-system Model 370 Manuel d'utilisateur télécharger pdf (Page 17)

3.8 PRINTING INFORMATION

Your Setra Digital Pressure Gauge is designed to print information when

connected to a printer, using the following procedure:

1. Set the printer up as described in its' manual.

2. Connect the RS-232 cable from the printer to the Model 370.

3. Make sure the printers on-line light is on.

4. Press PRINT to send the reading in the Model 370 display to the printer.

NOTE: When using a printer set the baud rate of the gauge to match that of

the printer (see Appendix I).

To interpret the meaning of the symbols printed, see Appendix III -

"RS-232 Serial Data Communications".

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Pas de commentaire

Setra-system Model 370 Manuel d'utilisateur Page 17